These machines are available for either
single or double worker operation at a
speed
of
60 strokes per minute, the number of
strokes being continuously indicated by an automatically indexing
counter. The
counter can be preset
for any number of strokes, the counting gear
automatically disengages
the indexing contact to stop the machine. Since the
handles of workers for use in grease working machines have to be
designed to form a bearing, only specifically constructed grease workers can be
used.
The grease worker is intended for use with the penetration
tests conforming to FTM 791-313 specifications. This worker is similar
in its dimensions
to
the one specified
by ASTM D 217-DIN 51 804-IP 50
but equipped with a plunger plate having 270 ( 1/16' dia.)
holes.
17-0001 Grease working
machine
Two-place
model for electrical operation and automatic control, comprising: heavy base plate, grease-worker quick-chucking, electronically controlled
counting mechanism (six digit ) with digital display automatically
indexing, gear motor with crank flanges, present to make 60 strokes per
minute. Exclusive of grease workers. For 220 V/50 Hz. ( Specify voltage
while ordering )
17-0002 Grease Worker
ASTM (D217-IP 50-ISO2137)
To fit grease working machine including 51-hole worker plate and
bi-metal thermometer, cast bronze handle designed as a guide
bearing.
7-0003 Grease Worker
FTM 791-313
To fit
grease working machine including 270-hole worker plate and bi-metal
thermometer, handle designed as a guide
bearing. |
