ASTM Specifications : D-2882

Features and specifications

Hydraulic Fluid Circulating System:
Capable of running 3 or 15 gallon test quantities. Low level, high pressure and low pressure safety shutoffs. Cyclonic disk for consistent flow. Tank fluid level indictor. Stainless steel tubing. A Vickers 104C vane pump. Twenty-five micron filter unit Flow measuring device. Over 25 ft.2 heat exchanger. Central drain manifold.

Electrical Controls and Components:
15 horsepower motor capable of 1200 plus or minus 60 rpm. NEMA 1 disconnect box with safety interlock. Electronic solenoid valve controls on main control panel. High and low pressure safety systems. Automatic process control centre with the following components; digital equipment includes pressure indicator with high/low limits, before pump temperature indicator, after pump temperature indicator with limit, resetable 100 hour timer, after fluid filter pressure indicator, before fluid filter pressure indicator, fluid flow totalize and reset, automatic preset "FLUSH" timer, fluid system ready light, motor run and jog feature, drain/charge/test switch, and motor "ON" timer.

Test Stand:
Oil resistant, laboratory grade table top. Aluminum mounting plate for motor/pump assembly. Leveling pads. Side mounted step for operator convenience. All metal fusion bonded.